|
Post by Greggo on Feb 26, 2014 14:24:16 GMT -6
Part Number Affected: 22-01645 There are two different casting sets used for this caliper (base part number 01645). They are identical except for the piston boot mounting feature. One version uses a piston boot that requires a retaining ring because the mounting feature does not have a retaining lip machined into the piston boot mounting feature. The second version has the machined retaining lip and uses a different piston boot. This version has an undercut which holds the boot in place. There is no difference in quality or safety for either type and both are completely interchangeable. Click on image below for a photo of the piston boot with and without a retaining ring. Attachments:Caliper 01645 Insert.pdf (277.82 KB)
|
|