|
Post by Zac on Feb 26, 2014 15:20:22 GMT -6
Part Numbers Affected: 21-17360, 21-17361, 22-01401, 22-01410, 22-02126, 22-02150, 22-02375, 22-09320, 22-09326, 22-09353, 22-17005, 22-17006, 22-17007, 22-17008, 22-17009, 22-17010, 22-17011, 22-17247, 22-17301, 22-17304, 22-17360, 22-17361, 22-17379, 22-17657, 22-17672, 22-17674, 22-17678, 22-17680, 22-17716, 22-17755, 22-17761, 22-17825, 22-17826, 22-17839, 22-17870, 22-17874, 22-17900, 22-17911, 22-17959. On these calipers, the bleeder port and inlet port are identical. When the caliper is installed on the vehicle, the caliper must be installed so that the bleeder port is located above and higher than the inlet port (see the picture below). This may require removing the bleeder screw from the port where it was installed at the factory, and installing it in the other port. Attachments:TC-002.pdf (130.64 KB)
|
|